BILLY Bookshelf Risers

A second display level

Raise the books and collectibles at the back of your shelf into view. Each riser is 3D printed as one solid piece. No assembly, tools or permanent installation: place it on your shelf and arrange your display.

Individual riser dimensions

Wide version: 188 × 130 × 80 mm / 7.40 × 5.12 × 3.15 in. Narrow version: 178 × 130 × 80 mm / 7.01 × 5.12 × 3.15 in. Please select your BILLY width as well as the number of individual risers.

Recommended quantities

Four wide risers fit across one Wide BILLY shelf; two narrow risers fit across one Narrow shelf. Pack quantities count individual risers, not complete shelves. Books, furniture and décor are not included.

Use & care

For lightweight display items such as books, manga, collectibles and décor. Distribute weight evenly. Not for sitting, standing, climbing or use as a step. Fine layer lines and small surface variations are normal.

Material & colour

Made from solid-colour matte PLA using 3D printing. Fine layer lines, small seams and minor surface variations may be visible. Dark Brown and Light Beige are coordinating solid colours, without wood grain. An exact match to IKEA furniture is not guaranteed; colours vary with lighting, screens and furniture batches.

An independent accessory

Designed by FURNIX3D, not made by, sponsored by or affiliated with IKEA. IKEA, BILLY and KALLAX names describe compatibility only. Furniture, original hardware and decorative items are not included.